Miprothane Membrane

MIPRO-THANE 1K POLYURETHANE WATER PROOFING MEMBRANE is solvent free, aromatic, elastomeric, urethane waterproofing membrane. This high solid, low odor, environmentally safe, fluid applied membrane is designed for use over concrete and plywood decks, metal and masonry surfaces. A PU compatible woven/non woven textile can be used as reinforcement.

APPLICATION

Waterproofing Membrane - First Application Apply MIPRO-THANE 1K POLYURETHANE WATER PROOFING MEMBRANE to the properly prepared and primed perimeter flashing using a brush, or phenolic resin core roller and to the properly pre pared deck surface using a squeegee or notched trowel. Apply with continuous coverage to minimize lines. Allow MIPRO-THANE 1K POLYURETHANE WATER PROOFING MEMBRANE to cure a minimum of 16 hours and a maximum of 48 hours at 21o C) 50% RH prior to proceeding with additional coats to ensure proper adhesion. If more

STORAGE & HANDLING

Store all materials in a dry environment at temperatures between 10 to 30ºC). All materials should be stored in compliance with local fire and safety requirements. Do not store at high temperatures or in direct sunlight. Do not allow uncured materials to freeze. Store materials in tightly closed original containers, off the ground, on plywood or non-asphaltic insulation board. Avoid moisture contamination. Always wear proper safety equipment, including an approved respirator, eye protection and gloves when mixing and/or applying these products. Do not breathe vapors. Do not keep opened containers in confined spaces. Consult published OSHA (Occupational Safety and Health Administration) regulations for additional information and compliance information.
SHELF LIFE

The shelf life is 9 months from the date of manufacture in the original, unopened container when the material is properly stored