MIPRO-S is a hot-pour, plasticized sulphur base compound, mainly used with acid resisting bricks to protect floors, pickling tanks, sumps etc. MIPRO-S is used with acid resistant brick and tile to protect storage tanks, floors, drains, sumps, pits, pickling tanks in steel & electro plating industries, tube mills etc
APPLICATION
Break the MICRO -S bricks into very small pieces and place in clean, dry heating pan. Start melting it with slow heating and stir it while heating until you get free flowing smooth liquid. Then pour between the joints of acid resistance bricks/tiles. Avoid air pocketing while filling the joints.
CHEMICAL RESISTANCE
MIPRO-S
MIPRO-S is recommended against non-oxidizing acids, diluted oxidizing acids and acidic and neutral salts at recommended temperature. It is not recommended for use against alkalis, Hydrofluoric acid, fluoride salts etc. For this, 100 % carbon filled MIPRO-S"C” is available.
STORAGE & SHELF LIFE
Always keep MIPRO S away from direct heat and in dry place. It can be stored like this, for unlimited period.
HEALTH & SAFETY
It is advisable to wear protective wears at the time of use of MIPRO-S and any other MIPRO brand products. Provide adequate ventilation while melting. Handle with care when hot. In case of inhalation of fumes, remove person to fresh air. In case of contact with skin or eyes, contact a doctor immediately. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
MIPRO-E HYB mortar is a versatile three (3)-component chemical resistant hybrid Novolac Epoxy Resin base mortar. The pro... Continue
MIPRO-CP is a two -part chemical setting cashew-phenolic base mortar used for acid resisting brick lining, to protect mo... Continue
MMIPRO-K SPL is Inorganic Special grade Pot. Silicate type, two-part chemical setting mortar. It is recommended against ... Continue
MIPRO-E is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant bric... Continue
(Novolac Epoxy Vinyl Ester Mortar) is used in the construction of floors, sumps, trenches, tanks, vessels and bleach tow... Continue
MIPRO-FA is a two-part chemical setting Furan base mortar used for bonding acid resistant bricks and tiles. It is imperm... Continue
MMIPRO-POL is a three parts chemical setting Polyester/Bisphenol resin base mortar. It exhibits excellent adhesion to ac... Continue
This is a two-pack chemical setting Phenolic resin base mortar. It is being used as bonding material for acid resisting ... Continue
All type of surface whether, it is concrete, steel or wood, and require protection against corrosive environment. To pro... Continue
Concrete and ordinary red brick masonry with cement plastered surface are basic methods for construction of floors, foun... Continue
MIPRO-K is Silicate type, two-part chemical setting mortar. It is recommended against permanently acidic condition, and ... Continue