Mipro-PR

AvailabilityIn Stock
CategoryEpoxy
Payment MethodsCash, COD, DirectDebit
Rated 0.0/5 based on 0 customer review
5
0
0%
4
0
0%
3
0
0%
2
0
0%
1
0
0%

Mipro-PR Details

All type of surface whether, it is concrete, steel or wood, and require protection against corrosive environment. To protect sub-striate against corrosive attack, it is recommended to apply anti-corrosive primer followed by further finish coats, screed lining or brick/tile lining. MIPRO-PR is most suitable primer to protect different type of sub-striate against atmospheric corrosion and chemical corrosion.

APPLICATION

MIPRO-PR can be applied on variety of sub-striate like steel, concrete, wood. To protect steel structure, tanks, pipes, girders, marine structure either exteriors or interiors. MIPRO-PR is very widely used on concrete as a primer where further acid resisting brick/tile lining is recommended

CHEMICAL RESISTANCE

PACKING:
25 Lts. 200 Lts. good quality MS container.

STORAGE & SHELF LIFE
MIPRO-PR should be stored in properly sealed containers away from direct sun light, heat and flame. Reseal container after use.

HEALTH & SAFETY

It is advisable to wear protective wears at the time of use of MIPRO-PR and all other MIPRO brand products. In case of contact with eyes, clean with plenty of water and consult a doctor. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our contro

Related Products

MIPRO-E(HYB) HYBRID NOVOLAC EPOXY MORTAR

MIPRO-E HYB mortar is a versatile three (3)-component chemical resistant hybrid Novolac Epoxy Resin base mortar. The pro... Continue

Mipro-CP CASHEW PHENOLIC RESIN MORTAR

MIPRO-CP is a two -part chemical setting cashew-phenolic base mortar used for acid resisting brick lining, to protect mo... Continue

Mipro-K (SPL)

MMIPRO-K SPL is Inorganic Special grade Pot. Silicate type, two-part chemical setting mortar. It is recommended against ... Continue

Mipro-E

MIPRO-E is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant bric... Continue

Mipro-VE

(Novolac Epoxy Vinyl Ester Mortar) is used in the construction of floors, sumps, trenches, tanks, vessels and bleach tow... Continue

Mipro-FA

MIPRO-FA is a two-part chemical setting Furan base mortar used for bonding acid resistant bricks and tiles. It is imperm... Continue

Mipro-POL

MMIPRO-POL is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant b... Continue

Mipro-P

This is a two-pack chemical setting Phenolic base mortar. It is being used as bonding material for acid resisting brick ... Continue

Mipro-S

MIPRO-S is a hot-pour, plasticized sulphur base compound, mainly used with acid resisting bricks to protect floors, pick... Continue

Mipro-MC

Concrete and ordinary red brick masonry with cement plastered surface are basic methods for construction of floors, foun... Continue

Mipro-K

MIPRO-K is Silicate type, two-part chemical setting mortar. It is recommended against permanently acidic condition, and ... Continue


Request For Quotation
Location
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,,
Ahmedabad - 382445
Gujarat (India)
Chemiprotect Engineers
All rights reserved - Copyright © 2024 - Powered by
4allBIZ
Request a Call Back!