MMIPRO-POL is a three parts chemical setting Polyester/Bisphenol resin base mortar. It exhibits excellent adhesion to acid resistant bricks/tile, concrete, surface. MIPRO-POL is resistant to very wide range of chemicals.
APPLICATION
After proper mixing of mortar should be buttered on back and sides of bricks/tiles to be laid. Apply little more mortar and after laying squeeze the excess mortar. If only a joint filling is to be done with MIPRO-POL, be sure that full depth of joints is filled with mortar. There should not be any air pocket in the joints. During & after completion of the installation, area must be kept dry and free from any other materials, traffic, which can affect setting & curing of MIPRO-POL.
CHEMICAL RESISTANCE
MIPRO-POL
MIPRO-POL is highly resistant to acids, salts, solvent oil and grease. Performance of MIPRO-POL in the presence of oxidizing chemicals makes it ideal for bedding & jointing material for use in the presence of chlorine and bleaching solutions, nitric and chromic acids. It is used widely in paper & pulp industries and electroplating plants.
STORAGE & SHELF LIFE
Always keep resin, catalysts and powder in cool, dry place, away from direct sunlight and moisture. If stored in sealed containers and bags; shelf life of Resin, Harder & Powder will be one year.
HEALTH & SAFETY
It is advisable to wear protective wears at the time of use of MIPROPOL and all other MIPRO brand products. In case of contact with eyes & skin. wash with plenty of water and consult a doctor. Adequate ventilation of working are is recommended. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
MIPRO-E HYB mortar is a versatile three (3)-component chemical resistant hybrid Novolac Epoxy Resin base mortar. The pro... Continue
MIPRO-CP is a two -part chemical setting cashew-phenolic base mortar used for acid resisting brick lining, to protect mo... Continue
MMIPRO-K SPL is Inorganic Special grade Pot. Silicate type, two-part chemical setting mortar. It is recommended against ... Continue
MIPRO-E is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant bric... Continue
(Novolac Epoxy Vinyl Ester Mortar) is used in the construction of floors, sumps, trenches, tanks, vessels and bleach tow... Continue
MIPRO-FA is a two-part chemical setting Furan base mortar used for bonding acid resistant bricks and tiles. It is imperm... Continue
This is a two-pack chemical setting Phenolic resin base mortar. It is being used as bonding material for acid resisting ... Continue
MIPRO-S is a hot-pour, plasticized sulphur base compound, mainly used with acid resisting bricks to protect floors, pick... Continue
All type of surface whether, it is concrete, steel or wood, and require protection against corrosive environment. To pro... Continue
Concrete and ordinary red brick masonry with cement plastered surface are basic methods for construction of floors, foun... Continue
MIPRO-K is Silicate type, two-part chemical setting mortar. It is recommended against permanently acidic condition, and ... Continue