MIPRO-P Acid Resistant Phenolic Resin Base Mortar

This is a two-pack chemical setting Phenolic resin base mortar. It is being used as bonding material for acid resisting brick masonry construction for protection against corrosive conditions mainly from acids, in more particular, its resistance to Sulphuric acid up to 70 % is very good.

APPLICATION

MIPRO-P mortar is buttered on clean, dry bricks or tiles, which, kept at ambient temperature. Apply little more material on center and place to avoid air pocketing while installation. If only joints are to be filled with MIPRO-P, it is essential that full depth be filled with mortar. During & after completion of the lying of bricks or tiles, the area must be kept dry and free from any other materials and traffic, which can affect setting & curing of MIPRO-P.

CHEMICAL RESISTANCE

MIPRO-P
MIPRO-P can provide very good protection against strong mineral acids up to 70 % and oxidizing acids, organic and fatty acids, oil, fats, and many solvents. MIPRO-P "C” 100 % carbon filled mortar is recommended to protect against HF, fluoride salts etc.

STORAGE & SHELF LIFE
Always keep solution & powder in cool dry place in sealed container and bag, away from direct sunlight, moisture. If stored as above and in sealed container at 20 C, shelf life of solution will be 3 months, and powder 6 months.

HEALTH & SAFETY

It is advisable to wear protective wears at the time of use of MIPROP and all other MIPRO brand products. In case of contact with skin & eyes wash with plant, of water and consult a doctor. This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.