Mipro-MC

AvailabilityIn Stock
CategoryEpoxy
Payment MethodsCash, COD, DirectDebit
Rated 0.0/5 based on 0 customer review
5
0
0%
4
0
0%
3
0
0%
2
0
0%
1
0
0%

Mipro-MC Details

Concrete and ordinary red brick masonry with cement plastered surface are basic methods for construction of floors, foundations, tanks, sumps manholes etc. These can be attacked by corrosive environment, spillages of acids and alkalis and other chemicals handled in modern chemical industries. To protect civil structure of plants and buildings from corrosive attack, acid resisting brick lining is most communally used method. MIPRO-MC is used as an inter-liner with acid resisting brick lining. It can also apply as open mastic flooring for heavy-duty flooring

APPLICATION

MIPRO-MC application consist of two coats of MIPROPR primer and followed by MIPRO-MC in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack.

  • FSurface preparation and application of MIPRO-PR: Refer application method of MIPRO-PR.
  • After doing necessary surface preparation and application of primer coating, area to be installed with MIPRO-MC should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. MIPRO-MC is then broken in small pieces and put it in heating pan. While heating, keeps material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes

CHEMICAL RESISTANCE

MIPRO-MC
MIPRO-MC has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats

STORAGE & SHELF LIFE
Keep MIPRO-MC away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs.

HEALTH & SAFETY

Handle melted MIPRO-MC compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of MIPROMC and all other MIPRO brand products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.

Related Products

MIPRO-E(HYB) HYBRID NOVOLAC EPOXY MORTAR

MIPRO-E HYB mortar is a versatile three (3)-component chemical resistant hybrid Novolac Epoxy Resin base mortar. The pro... Continue

Mipro-CP CASHEW PHENOLIC RESIN MORTAR

MIPRO-CP is a two -part chemical setting cashew-phenolic base mortar used for acid resisting brick lining, to protect mo... Continue

Mipro-K (SPL)

MMIPRO-K SPL is Inorganic Special grade Pot. Silicate type, two-part chemical setting mortar. It is recommended against ... Continue

Mipro-E

MIPRO-E is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant bric... Continue

Mipro-VE

(Novolac Epoxy Vinyl Ester Mortar) is used in the construction of floors, sumps, trenches, tanks, vessels and bleach tow... Continue

Mipro-FA

MIPRO-FA is a two-part chemical setting Furan base mortar used for bonding acid resistant bricks and tiles. It is imperm... Continue

Mipro-POL

MMIPRO-POL is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant b... Continue

Mipro-P

This is a two-pack chemical setting Phenolic base mortar. It is being used as bonding material for acid resisting brick ... Continue

Mipro-S

MIPRO-S is a hot-pour, plasticized sulphur base compound, mainly used with acid resisting bricks to protect floors, pick... Continue

Mipro-PR

All type of surface whether, it is concrete, steel or wood, and require protection against corrosive environment. To pro... Continue

Mipro-K

MIPRO-K is Silicate type, two-part chemical setting mortar. It is recommended against permanently acidic condition, and ... Continue


Request For Quotation
Location
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,,
Ahmedabad - 382445
Gujarat (India)
Chemiprotect Engineers
All rights reserved - Copyright © 2024 - Powered by
4allBIZ
Request a Call Back!