MIPRO-K (SPL) Acid Resistant Potassium Silicate Base Mortar

MMIPRO-K SPL is Inorganic Special grade Pot. Silicate type, two-part chemical setting mortar. It is recommended against permanently acidic condition, and can withstand much higher temperature compared to other resin type & sulfur type mortar. Most recommended against conc. Sulphuric, Nitric and Chromic acid conditions.

APPLICATION

Mortar is buttered on acid resistance brick/tile as usual bricklayers Method. Brick/tile also should be clean, dry and at ambient temperature. After hardening of the joints, it should be treated with 10 % Hydrochloric acid before the acid resisting lining is place in use. During & after completion of lining, area must be kept dry and free from any other materials and traffic, which can affect setting & curing of MIPRO-K SPL.

CHEMICAL RESISTANCE

MIPRO-K SPL

when completely set hard, resistant to high concentration of oxidizing acids like 98% sulphuric acid, conc. nitric acid chromic acid etc. inorganic acids and salts and most organic solvents at high temperature. It is not recommended against Hydrofluoric acid, fluorides, fluoride salts, water, diluted solutions, alkalis etc

STORAGE & SHELF LIFE

Always keep solution and powder in cool, dry place and away from direct sunlight, moisture etc. If stored in sealed container as above, shelf life of solution: 12 Months Powder: 12 Months

HEALTH & SAFETY

It is advisable to wear protective wears at the time of use of MIPROK SPL and all other IPRO brand products. In case of contact with skin or eyes wash with plenty of water and consult a doctor. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without any guarantee since the conditions of use are beyond our control.