Miproglass 101 I (Isopthalic Resin Base Glass Flake Filled Coating)

AvailabilityIn Stock
CategoryEpoxy
Payment MethodsCash, COD, DirectDebit
Rated 0.0/5 based on 0 customer review
5
0
0%
4
0
0%
3
0
0%
2
0
0%
1
0
0%

Miproglass 101 I (Isopthalic Resin Base Glass Flake Filled Coating) Details

The coating system is based on Isopthalic Resin, filled with inert C class glass flake in graded particle size with very special additives to provide maximum corrosion resistance properties. It can be applied in thickness of 750 microns to 1000 microns. This system for coating/tank lining system is formulated to offer excellent resistant to most corrosive chemicals used in process industries. MIPROGLASS 101 I coating will withstand gas temperatures up to 100 C, and can be used in immersion service at ambient temperatures. All the MIPROGLASS 101 I series coatings can be applied by brush or by spray, they are approx. 95 to 100% solids, and cure at ambient temperature. The recommended thickness is approx. 400-500 microns and this is obtained in one primer and two to four coats depending on different application environment.

TECHNICAL SPECIFICATION

Compressive Strength40 N/mm2
Tensile Strength12 N/mm2
Flexural Strength20 N/mm2
Abrasion Resistance – Taber (CS-17 Wheel)0.25 gm/1000gm.loading / 1000 rpm
Bond Strength to steel6 Mpa
Temperature Resistance60 TO 100 o C (dry)
Hardness (Shore D)30
Solid Content(mixed) 95 %
No. of Coats Recommended2 TO 3
Mixing Ratio100 to 1.5 to 2 by weight A:B
Density1.2
Pot Life20 minutes @. 25o C
Packaging5 Kgs, 30 Kgs.

 CHEMICAL RESISTANCE


MIPROGLASS 101 I
For information on the chemical resistance of each of these grades please contact CHEMIPROTECT ENGINEERS Corrosion Resistance guide.

STORAGE & SHELF LIFE
Storage & Shelf Life Unopened in dry conditions 10C – 25C /12 months in unopened container

HEALTH & SAFETY

Please request Surface Preparation and Installation Data sheets for specific advice

Related Products

Miproglass 101 E (HYB) Glass Flake Reinforced Novolac Epoxy Coating/Lining

MIPROGLASS 101 E HYB is a 100% solids, glass flake filled Novolac epoxy coating for steel and concrete surface coating. ... Continue

Glass Flake Filled Coating (Miproglass 101 SV)

A series of medium duty polyester, vinyl ester, Epoxy resin base coating designed to protect steel and concrete work aga... Continue

Miproglass 101 E (Glass Flake Filled Coating)

A series of medium duty polyester, vinyl ester, Epoxy resin base coating designed to protect steel and concrete work aga... Continue

Miproglass 201 E HYB (Trowelable Glass Flake Reinforced Novolac Lining)

MIPROGLASS 201 E HYBis a 100% solids, trowel applied, high performance, high chemical resistant C class glass flake rein... Continue

Miproglass 201 SV (Glass Flake Filled Lining)

A series of intermediate to heavy duty linings (or coatings) which can be applied to steel and concrete, to offer long t... Continue

Miproglass 201 E (Glass Flake Filled Lining)

A series of intermediate to heavy duty linings (or coatings) which can be applied to steel and concrete, to offer long t... Continue

Miproglass 201 I (Glass Flake Filled Lining)

A series of intermediate to heavy duty linings (or coatings) which can be applied to steel and concrete, to offer long t... Continue

Miproglass Primer (VE)

This is a low viscosity Vinyl Ester resin based two component primer, for the application on concrete and steel surfaces... Continue

Miproglass-EP

MIPRO-EP is a 100% solid epoxy primerAPPLICATIONApply MIPROGLASS-EP within its pot life.RECOMMENDED USESSpeciall... Continue


Request For Quotation
Location
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,
Ahmedabad - 382445
Gujarat (India)
Chemiprotect Engineers
All rights reserved - Copyright © 2024 - Powered by
4allBIZ
Request a Call Back!