MIPROGLASS 101 E HYB is a 100% solids, glass flake filled Novolac epoxy coating for steel and concrete surface coating. It can be applied at thickness ranging from 300 microns to 1500 microns one or multiple coats. MIPROGLASS 101 E HYB is also suitable for coating structural steel and concrete in corrosive fume or vapor environments. MIPROGLASS 101 E HYB has excellent resistance to splash & spills of many corrosive chemicals. MIPROGLASS 101 E HYB is a two-component product. It can be applied by air less spray, brush, roller, or trowel. MIPROGLASS 101 E HYB offers excellent resistance to acids, alkalis and chemicals including strong mineral acids, concentrated caustics, fuels, oils, salts and many solvents. MIPROGLASS 101 E HYB offers high impact & resistance, resistance to cracking, excellent bond strength to steel & concrete surface with surface tolerance.
APPLICATION
Weather conditions, especially dew point, should be constantly monitored during the work being done. Final blast cleaning and application of tank lining system must only be performed when the temperature of the steel substrate will not fall within 5°F of the dew point. Dehumidification and/o r temperature control may be necessary to meet this requirement. Use a surface thermometer to frequently monitor the temperature of the steel substrate before and during application.
SURFACE PREPARATION
MIPROGLASS 101 E HYB GLASS FLAKE REINFORCED NOVOLAC EPOXY COATING/LINING
MIPRO-K when completely set hard, resistant to high concentration of oxidizing acids like 98% sulfuric acid, conc. nitric acid chromic acid etc.., inorganic acids and salts and most organic solvents at high temperature. It is not recommended against Hydrofluoric acid, fluorides, fluoride salts, water, diluted solutions, alkalis etc
STORAGE & SHELF LIFE
PACKAGING & STORAGE MIPROGLASS 101 E HYB is available in 6 Kgs & 30 Kgs packing sizes, which contain premeasured Part A and Part B components. Keep MIPROGLASS 101 E HYB tightly sealed in original containers until ready for use. Store at 25o away from direct sunlight. Properly stored, MIPROGLASS 101 E HYB products have a minimum shelf life of one year.
CAUTION
MIPROGLASS 101 E HYB may cause skin irritation with prolonged or repeated contact. Handle with care and read the material safety data sheet, which is available for each product. .
A series of medium duty polyester, vinyl ester, Epoxy resin base coating designed to protect steel and concrete work aga... Continue
A series of medium duty polyester, vinyl ester, Epoxy resin base coating designed to protect steel and concrete work aga... Continue
The coating system is based on Isopthalic Resin, filled with inert C class glass flake in graded particle size with very... Continue
MIPROGLASS 201 E HYBis a 100% solids, trowel applied, high performance, high chemical resistant C class glass flake rein... Continue
A series of intermediate to heavy duty linings (or coatings) which can be applied to steel and concrete, to offer long t... Continue
A series of intermediate to heavy duty linings (or coatings) which can be applied to steel and concrete, to offer long t... Continue
A series of intermediate to heavy duty linings (or coatings) which can be applied to steel and concrete, to offer long t... Continue
This is a low viscosity Vinyl Ester resin based two component primer, for the application on concrete and steel surfaces... Continue
MIPRO-EP is a 100% solid epoxy primerAPPLICATIONApply MIPROGLASS-EP within its pot life.RECOMMENDED USESSpeciall... Continue