MIPRO-FA is a two-part chemical setting Furan base mortar used for bonding acid resistant bricks and tiles. It is impermeable in texture and resistant to a very wide range of chemicals, including strong acids alkalis, oils, solvents and unaffected by temperature up to 170 C. MIPRO-FA "C" a 100 % carbon filled mortar is available where resistant to Hydrofluoric acid, fluoride salts and strong hot alkalis are required.
APPLICATION
Ensure that bricks or tiles are clean, dry and stored at ambient temperature. Butter the bricks or tiles with mixed mortar ensuring uniform coverage, with a slight more in the centre so no air pockets are formed while its installation. When using as only jointing mortar, it is essential that MIPRO-FA is filled to the full depth of the joint. During and after completion of the application, the area must be kept dry and free from any other materials, which can affect setting and curing of MIPRO-FA.
CHEMICAL RESISTANCE
MIPRO-FA
MIPRO-FA is recommended to use against very wide range of acids, alkalis, solvents, salts, oils and fats. However MIPRO-FA is not recommended to use against HF, fluoride salts, and strong hot alkalis. For these conditions, MIPRO-FA "C" 100 % carbon filled mortar is available. Also it is not recommended against strong oxidizing acids like chromic acid, Nitric acid and other oxidizing agents.
STORAGE & SHELF LIFE
Always keep solution & powder in cool dry place in sealed container and bag, away from direct sun light, moisture etc. If stored as above, shelf life of solution: 1 year powder: 3-4 months
HEALTH & SAFETY
It is advisable to wear protective wears at the time of use of MIPRO-FA and all other MIPRO brand products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
MIPRO-E HYB mortar is a versatile three (3)-component chemical resistant hybrid Novolac Epoxy Resin base mortar. The pro... Continue
MIPRO-CP is a two -part chemical setting cashew-phenolic base mortar used for acid resisting brick lining, to protect mo... Continue
MMIPRO-K SPL is Inorganic Special grade Pot. Silicate type, two-part chemical setting mortar. It is recommended against ... Continue