MIPRO-FA Acid/Alkali Resistant Furan Resin Base Mortar

AvailabilityIn Stock
CategoryEpoxy
Payment MethodsCash, COD, DirectDebit
Rated 0.0/5 based on 0 customer review
5
0
0%
4
0
0%
3
0
0%
2
0
0%
1
0
0%

MIPRO-FA Acid/Alkali Resistant Furan Resin Base Mortar Details

MIPRO-FA is a two-part chemical setting Furan base mortar used for bonding acid resistant bricks and tiles. It is impermeable in texture and resistant to a very wide range of chemicals, including strong acids alkalis, oils, solvents and unaffected by temperature up to 170 C. MIPRO-FA "C" a 100 % carbon filled mortar is available where resistant to Hydrofluoric acid, fluoride salts and strong hot alkalis are required.

APPLICATION

Ensure that bricks or tiles are clean, dry and stored at ambient temperature. Butter the bricks or tiles with mixed mortar ensuring uniform coverage, with a slight more in the centre so no air pockets are formed while its installation. When using as only jointing mortar, it is essential that MIPRO-FA is filled to the full depth of the joint. During and after completion of the application, the area must be kept dry and free from any other materials, which can affect setting and curing of MIPRO-FA.

CHEMICAL RESISTANCE

MIPRO-FA
MIPRO-FA is recommended to use against very wide range of acids, alkalis, solvents, salts, oils and fats. However MIPRO-FA is not recommended to use against HF, fluoride salts, and strong hot alkalis. For these conditions, MIPRO-FA "C" 100 % carbon filled mortar is available. Also it is not recommended against strong oxidizing acids like chromic acid, Nitric acid and other oxidizing agents.

STORAGE & SHELF LIFE
Always keep solution & powder in cool dry place in sealed container and bag, away from direct sun light, moisture etc. If stored as above, shelf life of solution: 1 year powder: 3-4 months

HEALTH & SAFETY

It is advisable to wear protective wears at the time of use of MIPRO-FA and all other MIPRO brand products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.

Related Products

MIPRO-E(HYB) Acid/Alkali/Solvent Resistant Novolac Epoxy Resin Base Mortar

MIPRO-E HYB mortar is a versatile three (3)-component chemical resistant hybrid Novolac Epoxy Resin base mortar. The pro... Continue

MIPRO-CP Acid/Alkali Resistant Cashew Phenolic Resin Base Mortar

MIPRO-CP is a two -part chemical setting cashew-phenolic base mortar used for acid resisting brick lining, to protect mo... Continue

MIPRO-K (SPL) Acid Resistant Potassium Silicate Base Mortar

MMIPRO-K SPL is Inorganic Special grade Pot. Silicate type, two-part chemical setting mortar. It is recommended against ... Continue

MIPRO-E Acid/Alkali Resistant Standard Epoxy Resin Base Mortar

MIPRO-E is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant bric... Continue

MIPRO-VE Acid /Alkali Resistant Vinyl Ester Ressiin Base Mortar

(Novolac Epoxy Vinyl Ester Mortar) is used in the construction of floors, sumps, trenches, tanks, vessels and bleach tow... Continue

MIPRO-POL Acid/Alkali Resistant Polyester/Bisphenol Resin Base Mortar

MMIPRO-POL is a three parts chemical setting Polyester/Bisphenol resin base mortar. It exhibits excellent adhesion to ac... Continue

MIPRO-P Acid Resistant Phenolic Resin Base Mortar

This is a two-pack chemical setting Phenolic resin base mortar. It is being used as bonding material for acid resisting ... Continue

MIPRO-S Hot Melt Sulphur Mortar

MIPRO-S is a hot-pour, plasticized sulphur base compound, mainly used with acid resisting bricks to protect floors, pick... Continue

MIPRO-PR Anti-corrosive Bitumen Base Primer

All type of surface whether, it is concrete, steel or wood, and require protection against corrosive environment. To pro... Continue

MIPRO-MC Anti-corrosive Bitumen Base Mastic Compound

Concrete and ordinary red brick masonry with cement plastered surface are basic methods for construction of floors, foun... Continue

MIPRO-K Acid Resistant Silicate Base Mortar

MIPRO-K is Silicate type, two-part chemical setting mortar. It is recommended against permanently acidic condition, and ... Continue


Request For Quotation
Location
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,
Ahmedabad - 382445
Gujarat (India)
Chemiprotect Engineers
All rights reserved - Copyright © 2024 - Powered by
4allBIZ
Request a Call Back!