Mipro-ETS

AvailabilityIn Stock
CategoryEpoxy
Payment MethodsCash, COD, DirectDebit
Rated 0.0/5 based on 0 customer review
5
0
0%
4
0
0%
3
0
0%
2
0
0%
1
0
0%

Mipro-ETS Details

MIPRO-ETS is a three-component, towel applied epoxy resin base heavy-duty floor screed system. Can be applied at min. 3mm to max. 10mm thickness, with the help of power trowel or manually depending on thickness as underlayment for a variety of chemicals resistant and hardwearing flooring system. To improve clean ability and chemical resistance, the following top coatings are recommended; MIPRO-EC. MIPRO-EC (HYB), MIPROTHANE-WBC, MIPRO-WBC other coating options are available; please contact us for technical service for specific requirements

SUBSTRATE

Concrete sub-base must be in line, level, properly cured and dried, free from any contaminations like oil, grease or any other chemicals. Concrete or screed substrate should be a minimum of 25N/mm2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH and free from rising damp and ground water. 


STORAGE CONDITIONS

Store all components of MIPRO-ETS in seal container away from heat, direct sunlight, moisture. Avoid excessive heat and do not freeze. The shelf life is 2 years in the original, unopened container.

HEALTH & SAFETY

It is advisable to wear protective wears at the time of use of MIPRO-ETS and all other MIPRO brand products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor. This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use is beyond our control.

Related Products

Mipro-E (S/L)

MIPRO-E S/L is a seamless , self- Smoothing epoxy flooring system laid between 2 -3 mm in a single application .APPLIC... Continue

Mipro-EC (HYB)

MIPRO-EC HYB is a two part high solids solvent free novolac epoxy resin based coating system designed for hard wearing, ... Continue

Mipro-EC

MIPRO-E S/L is a seamless , self- Smoothing epoxy flooring system laid between 2 -3 mm in a single application .APPLIC... Continue

Mipro-EP

MIPRO-EP is an 100% solid epoxy polyamide primer.APPLICATIONSurface preparation Method are depending on the type of ... Continue

Mipro-EPR

EPOXY PATCH REPAIR MORTAR FOR FAST AND HIGH STRENGTH REPAIRMIPRO-EPR is a 3 component high strength, solvent-free epox... Continue

Mipro-E (SLS)

MIPRO-E-SLS is a 3 component epoxy self-leveling under lay (base coat) leveling screed .APPLICATIONMixing Shake Pack... Continue

Mipro-ETA

Chemiprotect Engineers offers this MIPRO-ETA high performance epoxy tile/stone/brick adhesive in 3 components. Mainly us... Continue

Mipro-WBE

MIPRO-WBE is a durable water dispersed, two pack epoxy coating. Formulated to provide a durable coating system for walls... Continue

Chemoxy-EG

CHEMOXY-EG - EPOXY GROUTEXCELLENT CHEMICAL RESISTANT, HIGH-STRENGTH, ABRASION RESISTANT, WATER RESISTANT, MOST SUITABL... Continue

Aquapoxy - UW Under Water Concrete Repair Mortar

Under Water Concrete Repair Mortar Under Water Tile GroutApplied in Wet Conditions and UnderwaterTwin Pack - Mixed... Continue


Request For Quotation
Location
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,,
Ahmedabad - 382445
Gujarat (India)
Chemiprotect Engineers
All rights reserved - Copyright © 2024 - Powered by
4allBIZ
Request a Call Back!