Mipro-EPR

AvailabilityIn Stock
CategoryEpoxy
Payment MethodsCash, COD, DirectDebit
Rated 0.0/5 based on 0 customer review
5
0
0%
4
0
0%
3
0
0%
2
0
0%
1
0
0%

Mipro-EPR Details

EPOXY PATCH REPAIR MORTAR FOR FAST AND HIGH STRENGTH REPAIR

MIPRO-EPR is a 3 component high strength, solvent-free epoxy resin repair mortar with High quality graded quartz filler and special mineral filled for high strength and excellent abrasion resistance. MIPRO-EPR is a three part mortar, supplied in kit size for ready to use at on-site for easy mixing and use.

SPECIAL FEATURES

  • Very High Physical Strength
  • Fast Development Strength – Minimum Down Time
  • Excellent Abrasion resistance thus suitable for high traffic areas
  • Excellent acid/alkali/Chemical Resistance
  • Excellent Bond Strength to damp Concrete Surface
  • impermeable to water

APPLICATION

Apply the mixed MIPRO-EPR mortar to the prepared concrete surface by steel trowel, pressing firmly into place to ensure good adhesion and full compaction. Thoroughly compact the mortar. Finish mortar with trowel. MIPRO-EPR mortar can be applied in sections up to 50mm thickness in horizontal locations or up to 12mm thickness in vertical locations in a single application and without the use of formwork.
Note: The minimum applied thickness of MIPRO-EPR is 5mm 

CHEMICAL RESISTANCE

MIPRO-EPR

MIPRO-EC has excellent resistance to a wide range of industrial chemicals. A few common chemicals as listed below:- Full chemical resistance achieved after 7 days at 250C

Citric Acid 10%Resistant
Tartaric acid 10%Resistant
Hydrochloric acid 10%Resistant
Sodium Hydroxide 30%Resistant
Diesel fuel / Petrol 100%Resistant
Sulphuric acid 10%Resistant
Sulphuric acid 50%Non-Resistant
Sugar solutions SaturatedResistant
Lactic acid 10%Resistant
Hydrocarbons 100%Resistant
Phosphoric acid 50%Resistant
Nitric acid 5%Resistant
Acetic acid 5%Resistant

STORAGE & SHELF LIFE

All products have a shelf life of 12 months at 30 C if kept in a dry store in the original, unopened bags or packs. Storage conditions Store in dry conditions in the original. Unopened bags or packs. If stored at high temperatures, the shelf life may be reduced to 4 to 6 months.

Related Products

MIPRO-E-S/L Epoxy Resin Base Self Leval Flooring System

MIPRO-E S/L is a seamless, self- Smoothing epoxy flooring system laid between 2 -3 mm in a single application .APPLICA... Continue

MIPRO-EC (HYB) Hybrid Novolac Epoxy Resin Base Coating

MIPRO-EC HYB is a two part high solids solvent free novolac epoxy resin based coating system designed for hard wearing, ... Continue

Mipro-EC

MIPRO-E S/L is a seamless , self- Smoothing epoxy flooring system laid between 2 -3 mm in a single application .APPLIC... Continue

Mipro-EP

MIPRO-EP is an 100% solid epoxy polyamide primer.APPLICATIONSurface preparation Method are depending on the type of ... Continue

Mipro-E (SLS)

MIPRO-E-SLS is a 3 component epoxy self-leveling under lay (base coat) leveling screed .APPLICATIONMixing Shake Pack... Continue

Mipro-ETA

Chemiprotect Engineers offers this MIPRO-ETA high performance epoxy tile/stone/brick adhesive in 3 components. Mainly us... Continue

Mipro-ETS

MIPRO-ETS is a three-component, towel applied epoxy resin base heavy-duty floor screed system. Can be applied at min. 3m... Continue

Mipro-WBE

MIPRO-WBE is a durable water dispersed, two pack epoxy coating. Formulated to provide a durable coating system for walls... Continue

Chemoxy-EG

CHEMOXY-EG - EPOXY GROUTEXCELLENT CHEMICAL RESISTANT, HIGH-STRENGTH, ABRASION RESISTANT, WATER RESISTANT, MOST SUITABL... Continue

Aquapoxy - UW Under Water Concrete Repair Mortar

Under Water Concrete Repair Mortar Under Water Tile GroutApplied in Wet Conditions and UnderwaterTwin Pack - Mixed... Continue


Request For Quotation
Location
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,
Ahmedabad - 382445
Gujarat (India)
Chemiprotect Engineers
All rights reserved - Copyright © 2024 - Powered by
4allBIZ
Request a Call Back!