MIPRO-E(HYB) HYBRID NOVOLAC EPOXY MORTAR

AvailabilityIn Stock
CategoryEpoxy
Payment MethodsCash, COD, DirectDebit
Rated 0.0/5 based on 0 customer review
5
0
0%
4
0
0%
3
0
0%
2
0
0%
1
0
0%

MIPRO-E(HYB) HYBRID NOVOLAC EPOXY MORTAR Details

MIPRO-E HYB mortar is a versatile three (3)-component chemical resistant hybrid Novolac Epoxy Resin base mortar. The product exhibits excellent bond strength, high chemical resistance and reliable curing characteristics.

APPLICATION

MIPRO-E HYB mortar is applied by trowel to clean, dry, neutral surface with following procedures:

  • All bonding surface shall be buttered completely without voids.
  • Mortar joints should be kept full, and minimum 4mm wide.
  • Mortar may be applied directly over mastic membrane surface and other membrane surfaces including rubber and plastics.
  • Reducing the ratio of filler in the mix shall not lengthen the working & setting time of mortar. These factors are best controlled by temperature

STORAGE & SHELF LIFE

All the components Resin, Hardener & Filler must be kept in cool, dry place and in covered shed.

HEALTH & SAFETY

It is advisable to wear protective wears at the time of use of MIPRO-E HYB and all other MIPRO brand products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor. This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use is beyond our control

Related Products

Mipro-CP CASHEW PHENOLIC RESIN MORTAR

MIPRO-CP is a two -part chemical setting cashew-phenolic base mortar used for acid resisting brick lining, to protect mo... Continue

Mipro-K (SPL)

MMIPRO-K SPL is Inorganic Special grade Pot. Silicate type, two-part chemical setting mortar. It is recommended against ... Continue

Mipro-E

MIPRO-E is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant bric... Continue

Mipro-VE

(Novolac Epoxy Vinyl Ester Mortar) is used in the construction of floors, sumps, trenches, tanks, vessels and bleach tow... Continue

Mipro-FA

MIPRO-FA is a two-part chemical setting Furan base mortar used for bonding acid resistant bricks and tiles. It is imperm... Continue

Mipro-POL

MMIPRO-POL is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant b... Continue

Mipro-P

This is a two-pack chemical setting Phenolic base mortar. It is being used as bonding material for acid resisting brick ... Continue

Mipro-S

MIPRO-S is a hot-pour, plasticized sulphur base compound, mainly used with acid resisting bricks to protect floors, pick... Continue

Mipro-PR

All type of surface whether, it is concrete, steel or wood, and require protection against corrosive environment. To pro... Continue

Mipro-MC

Concrete and ordinary red brick masonry with cement plastered surface are basic methods for construction of floors, foun... Continue

Mipro-K

MIPRO-K is Silicate type, two-part chemical setting mortar. It is recommended against permanently acidic condition, and ... Continue


Request For Quotation
Location
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,,
Ahmedabad - 382445
Gujarat (India)
Chemiprotect Engineers
All rights reserved - Copyright © 2024 - Powered by
4allBIZ
Request a Call Back!