MIPRO-E S/L is a seamless , self- Smoothing epoxy flooring system laid between 2 -3 mm in a single application .
APPLICATIONS
Surface Preparation Substrate should be structurally sound, clean and free from loose particles, oil, grease and other contaminants. Remove cement laitance, loose particles and other contaminants from surface by mechanical cleaning preferably stone grinding and followed by vacuuming.
CHEMICAL RESISTANCE
MIPRO-EC has excellent resistance to a wide range of industrial chemicals. A few common chemicals as listed below:- Full chemical resistance achieved after 7 days at 250C
Excellent | Good | Limited | |
---|---|---|---|
Citric Acid 10% | + | ||
HCl Acid 10% | + | ||
Sulphuric Acid 10% | + | ||
Lactic Acid 5% | + | ||
Sodium Hydroxide 70% | + | ||
Engine Oil | + | ||
Hydraulic Oil | + | ||
Petrol | + |
HEALTH & SAFETY
Product contains epoxy resins and amines. Do not take internally. May irritate eyes and skin. Always use with suitable protective gears. Close container tightly after use. Keep out of reach of children. For further information , refer to the product material safety data sheet , available upon request
MIPRO-E S/L is a seamless, self- Smoothing epoxy flooring system laid between 2 -3 mm in a single application .APPLICA... Continue
MIPRO-EC HYB is a two part high solids solvent free novolac epoxy resin based coating system designed for hard wearing, ... Continue
MIPRO-E-SLS is a 3 component epoxy self-leveling under lay (base coat) leveling screed .APPLICATIONMixing Shake Pack... Continue
CHEMOXY-EG - EPOXY GROUTEXCELLENT CHEMICAL RESISTANT, HIGH-STRENGTH, ABRASION RESISTANT, WATER RESISTANT, MOST SUITABL... Continue
Under Water Concrete Repair Mortar Under Water Tile GroutApplied in Wet Conditions and UnderwaterTwin Pack - Mixed... Continue