MIPRO-EC HYB is a two part high solids solvent free novolac epoxy resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required.
APPLICATION
Stir well before mixing Part A and Part B and mix in the prescribed ratio.Apply one coat of MIPRO-EP primer on the clean and dry surface.MIPRO-EC HYB should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere.Apply min. 2 coats with the intercoat interval of 6-8 hrs
FEATURES
MIPRO-EC HYB
RECOMMENDED USES
HEALTH & SAFETY
Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor.
MIPRO-E S/L is a seamless, self- Smoothing epoxy flooring system laid between 2 -3 mm in a single application .APPLICA... Continue
MIPRO-E-SLS is a 3 component epoxy self-leveling under lay (base coat) leveling screed .APPLICATIONMixing Shake Pack... Continue
CHEMOXY-EG - EPOXY GROUTEXCELLENT CHEMICAL RESISTANT, HIGH-STRENGTH, ABRASION RESISTANT, WATER RESISTANT, MOST SUITABL... Continue
Under Water Concrete Repair Mortar Under Water Tile GroutApplied in Wet Conditions and UnderwaterTwin Pack - Mixed... Continue