Mipro-E (SLS)

AvailabilityIn Stock
CategoryEpoxy
Payment MethodsCash, COD, DirectDebit
Rated 0.0/5 based on 0 customer review
5
0
0%
4
0
0%
3
0
0%
2
0
0%
1
0
0%

Mipro-E (SLS) Details

MIPRO-E-SLS is a 3 component epoxy self-leveling under lay (base coat) leveling screed .


APPLICATION

Mixing Shake Pack A separately and mix well with Pack B in a mixing drum (approx. 20 liter capacity) for at least 30 seconds with a slow speed stirrer. Add Component C (Powder) into the mixed binder (A+B) and stir for at least 2 minutes until workable consistency. Viscosity can be adjusted by varying the powder content.

STORAGE

MIPRO-E-SLS
All the components Resin, Hardener & Filler must be kept in cool, dry place and in covered shed. HEALTH & SAFETY: It is advisable to wear protective wears at the time of use of EPOXY GROUT (HP) and all other MIPRO brand products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor. This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use is beyond our control.

HEALTH & SAFETY

Although MIPROFLOOR ECSL is a water based product, certain of its content may cause skin and eye irritation. Always use with suitable protective gears. This product is for professional use only. Please consult the relevant Health & Safety Data Sheet, available on request and sent with each delivery.

Related Products

MIPRO-E-S/L Epoxy Resin Base Self Leval Flooring System

MIPRO-E S/L is a seamless, self- Smoothing epoxy flooring system laid between 2 -3 mm in a single application .APPLICA... Continue

MIPRO-EC (HYB) Hybrid Novolac Epoxy Resin Base Coating

MIPRO-EC HYB is a two part high solids solvent free novolac epoxy resin based coating system designed for hard wearing, ... Continue

Mipro-EC

MIPRO-E S/L is a seamless , self- Smoothing epoxy flooring system laid between 2 -3 mm in a single application .APPLIC... Continue

Mipro-EP

MIPRO-EP is an 100% solid epoxy polyamide primer.APPLICATIONSurface preparation Method are depending on the type of ... Continue

Mipro-EPR

EPOXY PATCH REPAIR MORTAR FOR FAST AND HIGH STRENGTH REPAIRMIPRO-EPR is a 3 component high strength, solvent-free epox... Continue

Mipro-ETA

Chemiprotect Engineers offers this MIPRO-ETA high performance epoxy tile/stone/brick adhesive in 3 components. Mainly us... Continue

Mipro-ETS

MIPRO-ETS is a three-component, towel applied epoxy resin base heavy-duty floor screed system. Can be applied at min. 3m... Continue

Mipro-WBE

MIPRO-WBE is a durable water dispersed, two pack epoxy coating. Formulated to provide a durable coating system for walls... Continue

Chemoxy-EG

CHEMOXY-EG - EPOXY GROUTEXCELLENT CHEMICAL RESISTANT, HIGH-STRENGTH, ABRASION RESISTANT, WATER RESISTANT, MOST SUITABL... Continue

Aquapoxy - UW Under Water Concrete Repair Mortar

Under Water Concrete Repair Mortar Under Water Tile GroutApplied in Wet Conditions and UnderwaterTwin Pack - Mixed... Continue


Request For Quotation
Location
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,
Ahmedabad - 382445
Gujarat (India)
Chemiprotect Engineers
All rights reserved - Copyright © 2024 - Powered by
4allBIZ
Request a Call Back!