Mipro-E (S/L)

MIPRO-E S/L is a seamless , self- Smoothing epoxy flooring system laid between 2 -3 mm in a single application .

APPLICATION

Thoroughly prepare the floor surface, if necessary repair and level the floor surface. Apply primer MIPRO-EP solvent free epoxy primer by roller and allow to cure. Apply MIPRO-E S/L floor topping by trowel, squeegee or roller. Thoroughly spike roll the MIPRO-E S/L and allow to cure installation time will vary with site conditions, the areas involved and the system chosen.

LIMITATION

MIPRO-E S/L
MIPRO-E S/L should not be applied onto surfaces known to suffer from rising damp conditions or having a relative humidity of greater than 75% as measure by a thermo hygrometer. If such an occurrence should happen it is a recommended to apply MIPROCEM S/L as a moisture barrier. Further information available upon request. If movement or cracking of the substrate takes place after application then reflective cracking of the topping may occur. All know expansion joints should be maintained in the topping.

TEMPERATURE:
MIPRO-E S/L should not be applied at material or floor temperatures below 100C. Temperature should not fall below 50C in the 24 hrs after application.

HEALTH & SAFETY

Some of the components of this product may be hazardous during mixing and application. Keep out of reach of children. For further information, refer to the product Material Safety Data Sheet, available upon request