MIPRO-E Acid/Alkali Resistant Standard Epoxy Resin Base Mortar

MIPRO-E is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant bricks/tile, concrete, MS surface. MIPRO-E is resistant to very wide range of chemicals

APPLICATION

After proper mixing, mortar should be buttered on back and sides of bricks/tiles to be laid. Apply little more mortar and after lying squeeze the excess mortar. If only joints filling are done with MIPRO- E, be sure that full depth of joints is filled with mortar. There should not any air pocket in the joints. During & after completion of the installation, area must be kept dry and free from any other materials, traffic, which can affect setting & curing of MIPRO-E.

STORAGE & SHELF LIFE

Always keep resin, hardener and powder in cool, dry place, away from direct sunlight and moisture. If stored in sealed containers and bag shelf life of Resin, Harder & Powder will be one year.

HEALTH & SAFETY

It is advisable to wear protective wears at the time of use of MIPRO-E and all other MIPRO brand products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor.

This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.