Miprocrete-HF

A 4 component polyurethane trowel applied screed in thickness from 6-9mm for industrial application and repairing system in matt anti-skid finish offering versatility in performance, aesthetics and economics.

APPLICATION

Apply MIPRO-CRETE HF WITHIN ITS POT LIFE. Spread the composite matrix to thickness 6—10mm and consolidate with steel trowel to the correct depth. Use short nap roller dipped in xylene and roll lightly on the surface to bring up the resin.

CHEMICAL RESISTANCE

• MIPRO-CRETE HF will resist spillages of
• Dilute and concentrated acids: hydrochloric, nitric, phosphoric and Sulfuric.
• Dilute and concentrated alkalis, including sodium hydroxide to 50% concentration.
• Most dilute and concentrated organic acids.
• Fats, oil and sugar.
• Mineral oils, kerosene, gasoline and brake fluids.
• Most organic solvents.
  Resistance is maintained in many cases to 130°C, which should be regarded as the maximum service temperature. Detailed test data available upon request.

STORAGE & SHELF LIFE
All parts of MIPRO-CRETE-HF should be stored properly in origin (un-opened) packaging in dry conditions at 10-32°C.

will be 6 months minimum. Exaggerated temperature humidity ranges can adversely affect shelf life.

HEALTH & SAFETY

Some of the components of this product may be hazardous during mixing & application. Always use with suitable protective gears. Close container tightly after use. Keep out of reach of children.