MIPRO-CP Acid/Alkali Resistant Cashew Phenolic Resin Base Mortar

MIPRO-CP is a two -part chemical setting cashew-phenolic base mortar used for acid resisting brick lining, to protect most commonly used construction materials like RCC, MS, steel, brick masonry construction etc., from corrosive environment in modern chemical age. MIPRO-CP is resistant to acids, alkalis, and solvents, etc. at temperature up to 170 C

APPLICATION

Ensure bricks or tiles are clean, dry and kept at the same temperature of MIPRO-CP. Apply mixed mortar on brick/tile in even thickness on all sides for bedding & jointing with the same materials. Apply little more in center so no air pockets are formed while its installation. For only joints filling, it is recommended to take great care that full depth is filled with the same. During & after completion of the application, the area must be kept dry and free from and other materials and traffic, which can affect setting & curing of MIPRO-CP 

CHEMICAL RESISTANCE

MIPRO-CP

MIPRO-CP will provide very good protection against most acids, alkali solvents, oil, fats, salts etc. However it is not recommended for protection against HF, fluoride salts etc..

STORAGE & SHELF LIFE

Always keep solution & powder in cool, dry place, away from direct sunlight and moisture. If stored in sealed container and bags, shelf life of solution will be 12 months, and shelf life of powder will be 4-5 months.

HEALTH & SAFETY

it is advisable to wear protective wears at the time of use of MIPROCP and all other MIPRO brand products. In case of contact with skin and eyes, wash with plenty of water and consult a doctor. This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.