CHEMOXY-EG - EPOXY GROUT
EXCELLENT CHEMICAL RESISTANT, HIGH-STRENGTH, ABRASION RESISTANT, WATER RESISTANT, MOST SUITABLE FOR FOOD, DAIRY, PHARMACEUTICAL INDUSTRIES, HYGIENIC: ANTIBECTERIAL
FEATURES
ADVANTAGES
INTRODUCTION
CHEMOXY-EG Epoxy grout is high performance epoxy grout available in 2 components & three components, 100% VOC free, which offers excellent chemical resistant, high strength, hygienic conditions. It is very user friendly, easy to mix and apply
Uses
CHEMOXY-EG Epoxy grout finds its application as grout & adhesive for;
INDUSTRY WISE APPLICATIONS
CHEMOXY-EG Epoxy grout find best application as grout/adhesive for floor & wall tiles in dairy, food, breweries, pharmaceutical, retail food out lets, ready to eat food mfg. plants, bottling plants, abattoirs, ice-cream mfg. & retail outlets, sea food processing units etc…
CHEMOXY-EG Epoxy grout find best application as grout/adhesive for floor & wall tiles in battery charging rooms, battery mfg. plant, pulp & paper, caustic chlorine industry, r. o. plant, water treatment & effluent treatment plant acid/alkali resistant brick/tile lining etc…
Fixing of granite & marble window, steps, door steps, fixing of tile in swimming pools etc…
APPLICATION
SURFACE REQUIREMENTS
If grouting new tile joint, make sure joints are free from and efflorescence, laitance, loose sand, dirt etc. Remove all such materials with suitable means. If re-grouting old, used tile, make sure all joints are free from any kind of contaminations like oil, grease, salts. Clean joints with suitable detergent/cleaner and make sure joints are dry before re-grouting.
Before starting joints filling, check that appropriate tile areused for specific application. All tiles are fixed firmly with sub base with the use of appropriate tile adhesive.Check for expansion & movement joints are filled with suitable flexible jointing materials.Do not use this grout in ambient temp. is below 10o C and joints are in high damp condition.
MIXING
1. Stir well Part – A till you get smooth uniform color.
2. Stir well Part – B also.
3. IN a clean container, pour Part – A and then Part – B.
Mix well to get uniform color.
Use slow speed electricdrill mixer for large quantity.
4. The add slowly Part – C to mix materials of Part – A & B.
5. Mix till you get smooth, creamy mixer in uniform color, free from any lumps or unmixed fillers.
If large quantity is mixed, immediately pour it on floor or divide in to small quantities between applicators.
USE MIXED EPOXY GROUT WITHIN OPEN TIME
Open time depend on mixed quantity, ambient temperature, time taken for mixing, different application area etc
APPLICATION OF GROUT
Pour/apply mix grout on floor or wall and work the grout in to joints using hard rubber grout trowel. Make sure all joints are fully grouted with materials without any air pockets. Move rubber trowel diagonally to avoid any air bubble in joints.
Wait for 20 to 30 minutes (depending on ambient temp.) and clean the excess epoxy grout mortar from tile with the use of damp sponge. Work in round motion and repeat the cleaning action twice with work water.
Make sure you clean all excess grout on tile. Don’t allow water to go stand on epoxy grout in joint
MIPRO-E S/L is a seamless, self- Smoothing epoxy flooring system laid between 2 -3 mm in a single application .APPLICA... Continue
MIPRO-EC HYB is a two part high solids solvent free novolac epoxy resin based coating system designed for hard wearing, ... Continue
MIPRO-E-SLS is a 3 component epoxy self-leveling under lay (base coat) leveling screed .APPLICATIONMixing Shake Pack... Continue
Under Water Concrete Repair Mortar Under Water Tile GroutApplied in Wet Conditions and UnderwaterTwin Pack - Mixed... Continue